To get the best performance out of our products, it is important to use the correct insert tightening torque. In the Sandvik Coromant assortment there are different kinds of torque hand tools. The 5680 105-series is used for bits and can be adjusted to the correct torque value. The 5680 100-series is preset and torque is matched to the TORX PLUS® size. The Coromant web have torque information for all tools to get the correct fastening of the insert and most of our tools are marked with tightening torque.
Adjustable torque handles for bits:
| Art code handle | Nm | In Ibs | Design |
| 5680 105-01 | 0,3-1,2 | Straight | |
| 5680 105-02 | 1,2-3,0 | Straight | |
| 5680 105-03 | 2,5-11,5 | Straight | |
| 5680 105-04 | 11-26 | Straight | |
| 5680 105-05 | 3-6 | Angled | |
| 5680 105-06 | 4-8,8 | Angled | |
| 5680 105-07 | 26-55 | Angled | |
| 5680 105-08 | 35-78 | Angled | |
| 5680 099-01 | 3-15 | 27-133 | Ratchet |
Bits:
| Art code bits | Length | Grip |
| 5680 083-01 | 25mm | HEX 3 |
| 5680 083-04 | 50mm | HEX 2,5 |
| 5680 083-05 | 25mm | HEX 4 |
| 5680 101-01 | 50mm | HEX 5 |
| 5680 084-01 | 50mm | 8IP |
| 5680 084-02 | 50mm | 15IP |
| 5680 084-03 | 90mm | 15IP |
| 5680 084-04 | 50mm | 7IP |
| 5680 084-05 | 50mm | 9IP |
| 5680 084-06 | 50mm | 10IP |
| 5680 084-07 | 50mm | 20IP |
| 5680 084-08 | 90mm | 20IP |
| 5680 084-09 | 90mm | 25IP |
| 5680 084-10 | 90mm | 30IP |
| 5680 084-11 | 50mm | 6IP |
| 5680 084-12 | 80mm | 27IP |
| 5680 084-13 | 35mm | 50IP |
| 5680 084-14 | 50mm | 30IP |
| 5680 084-15 | 25mm | 15IP |
| 5680 084-16 | 25mm | 30IP |
| 5680 084-17 | 25mm | 6IP |
| 5680 084-18 | 25mm | 7IP |
| 5680 084-19 | 25mm | 8IP |
| 5680 084-20 | 25mm | 9IP |
| 5680 084-21 | 25mm | 10IP |
| 5680 084-22 | 25mm | 20IP |
| 5680 084-23 | 25mm | 25IP |
Torque screw drivers (not for bits):
| Art code | Key grip | Nm | In Ibs | Design |
| 5680 100-01 | 6IP | 0,6 | 5,3 | Straight |
| 5680 100-02 | 7IP | 0,9 | 8 | Straight |
| 5680 100-03 | 8IP | 1,2 | 10,6 | Straight |
| 5680 100-04 | 9IP | 1,4 | 12,4 | Straight |
| 5680 100-05 | 10IP | 2 | 18 | Straight |
| 5680 100-06 | 15IP | 3 | 27 | Straight |
| 5680 100-07 | 20IP | 5 | 45 | Angled |
| 5680 100-08 | 25IP | 7 | 63 | Angled |
| 5680 100-09 | HEX 5 | 6 | 54 | Angled |
| 5680 100-10 | 20IP | 6 | 54 | Angled |
Bits set including 7 metric HEX bits:
| Art code set | Key grip | Length |
| 5680 110-01 | 1,5 | 50mm |
| 2 | 50mm | |
| 2,5 | 50mm | |
| 3 | 50mm | |
| 4 | 50mm | |
| 5 | 50mm | |
| 6 | 50mm |
Bits set incl. 10 inch HEX bits:
| Art code set | Key grip | Length |
| 5680 111-01 | 1/16" | 50mm |
| 5/64" | 50mm | |
| 3/32" | 50mm | |
| 7/64" | 50mm | |
| 1/8" | 50mm | |
| 9/64" | 50mm | |
| 5/32" | 50mm | |
| 3/16" | 50mm | |
| 7/32" | 50mm | |
| 1/4" | 50mm |
