Aluminium machining knowledge
Welcome to your one stop source for knowledge and information in how to machine automotive and e-mobility aluminium components. Explore tooling and component solutions, look at films and knowledge sessions or read an article. You will also find product publications to download, see more of our digital offer and services.
Welcome and we hope you enjoy!
Component solutions
With your specific component as a starting point, we can recommend a complete machining solution for the component features. Optimizing the tools, provide machining methods and thereby secure that the end result is of highest quality. We work globally, with a strong focus on research and R&D. For you, this means that you have the collected competence from Sandvik Coromant at hand when you meet one of our experts.
Machining solutions for automotive aluminium components
Automotive manufacturers are facing a big transformation. New environmental legislations and the expectations from more environmentally conscious consumers are pushing the manufacturers for new low- and zero-emission vehicles.
Aluminum can be one answer to the component challenges the manufacturing industry is facing. Aluminum is one of the lightest metals in the world, almost three times lighter than iron but very strong and corrosion resistant. Also, aluminum can be reused over and over again. It can be melted and reused without any harm or change done to its mechanical properties. Thanks to effective recycling, approximately 75% of all aluminum ever produced, is still in use today which is great for a more sustainable future.
Electric vehicles are on the rise, but it will take time until the internal combustion engine leaves the stage completely. In the current effort to use cleaner energy, the application of lightweight materials in internal combustion engines becomes imperative as it results in greater fuel efficiency and thus reduces pollution.
The power train of a European passenger car typically contains around 80 kilograms of aluminum, which means these parts – the engine, gear box, suspension parts, housings – are an obvious area of interest for light weighting measures. By replacing the conventional cast iron with aluminum alloys can reduce the weight of the engine block by up to 40–55%, even accounting for the lower strength of aluminum compared to grey cast iron. Several transmission components, particularly gear box housings, electrification devices/components, suspension arms and rear axle, are prime examples of driveline applications where aluminum is a favored material.
Sandvik Coromant offers solutions and tools for aluminum components, backed up with in-depth application know-how. We have a global presence with dedicated engineering teams supporting the automotive industry with several high-quality solutions.
Here we are sharing a selection of productive solutions for some of the challenging features in aluminium machining.
M5Q90
Roughing tangential milling cutter, designed to clean the surfaces in the first machining stage on newly casted aluminium parts in a single operation without burring
M5R90
A first-choice solution for roughing to semi-finishing in shoulder milling operations of automotive aluminium components, such as cylinder blocks, cylinder heads and transmission housings
M5C90
Face milling concept for high speed direct finishing of aluminium automotive parts with wide cutter engagement. It can replace the need for both roughing and finishing, thus only one operation is needed
M5B90
An engineered face milling cutter that offers outstanding surface quality, minimized cycle times, close component tolerances and high-volume production
M5F90
Machining parts without burring, scratching or chipping, M5F90 is a concept face-milling cutter that enables roughing and finishing in a single operation
CoroTap® 100
Superior tool life and high productivity are just some of the benefits offered by this exceptional tool. Suitable for both through and blind holes
CoroTap® 200
CoroTap® 200 feature spiral point taps for through holes designed to push the chips forward. The range includes versatile taps for various materials and optimized taps for specific materials and applications. Tailor Made and Advanced Engineered tools are available within the Customized solutions range
CoroTap® 300
CoroTap® 300 is a range of spiral flute taps suitable for tapping in blind holes up to 3 × D. There are different helix angles suitable for different applications. The range features versatile taps for various materials and optimized taps for specific materials and applications. Tailor Made and Advanced Engineered tools are available within the Customized solutions range
CoroTap® 400
CoroTap® 400 is a high-speed, chip-free forming tap suitable for both through- and blind-holes in steel, stainless steel, aluminium and HRSAs. Versatile and optimized forming taps are available, with and without oil grooves, in an assortment of diameters, grades, coatings and thread forms to suit a range of applications
M610
Stand-alone milling cutter for finishing milling of bi-metal materials such as aluminium and GCI. It requires no set-up and no adjustment, and results in high feed rates with no chipping, burring or scratching on the parts
B685
The B685 cylinder boring bar is designed to combine roughing and semi-finishing in one operation. The solution provides excellent roundness and cylindricity and allows for a smooth finishing operation thanks to the integrated Silent Tool dampener
B687
The B687 cylinder boring bar is designed for productive and stable finishing. The cutter is available in different designs depending on operation. Use the three-cartridge design for reliable performance in under-coolant applications
B681
B681 is designed and developed for roughing in cylinder boring operations. The solution produces excellent roundness and cylindricity, allowing for a smooth semi finishing operation due to the integrated Silent Tools™ damped adaptors
B683
B683 is designed and developed for semi finishing in cylinder boring operations. The solution produces excellent roundness and cylindricity, allowing for a smooth finishing operation due to the integrated Silent Tools™ damped adaptors
CoroDrill® 400
The straight flute CoroDrill® 400 is optimized to provide highly productive hole-making in aluminium and cast iron components for the automotive industry
CoroDrill® 430
The spiral flute CoroDrill® 430 is optimized to provide extreme efficiency, reliability and durability during hole-making in aluminium and cast iron components for the automotive industry
CoroDrill® 880
CoroDrill 880’s optimized centre and periphery geometries, combined with dedicated diamond-coated grades for each insert position, deliver not only outstanding tool life and productivity but also an impressive ability to handle sticky non-ferrous metals
CoroMill® Century
Face mill concept with aluminium or steel body for high speed machining. The tool is designed with serrated insert interface for safe performance and reduced run-out
Films and knowledge sessions
The best way to get to know a tool is to see it perform in action. View our compilation of product and component demo films or perhaps tip films related aluminium machining and get inspired.
Solid round tools knowledge session – machining aluminium
Do you want to learn more how to optimize your strategies using drills, taps and reamers in aluminium. Welcome to view this knowledge session with our yellow coat specialists.
Tip film #43 - Optimizing tapping operations in aluminium
Reduce the total cost per hole when tapping. We will demonstrate proven methods that will help you meet your customers’ demand for efficiency.
Metal cutting in automotive – improve your production
The automotive industry and metal cutting is a demanding business. You need to improve your production and reduce your cost per part while maintaining quality. Sandvik Coromant have the expertise and experience to map the processes that will thrust your business forward. We would like to talk to you about component solutions.
Milling cutters for automotive aluminium machining
The complete series of M5 milling cutters, dedicated for machining automotive and e-mobility aluminium components, offers everything from first stage roughing machining to super finishing.
M5Q90 milling cutter – for first stage roughing operations in aluminium
Demo film presenting M5Q90. This milling cutter cleans the surfaces of newly casted aluminium cylinder heads and engine blocks in one smooth operation, without burring.
M5R90 milling cutter – for roughing and semi-finishing of aluminium automotive parts
Demo film presenting M5R90. This is our first choice for roughing to semi-finishing in shoulder milling operations of automotive aluminium components such as cylinder blocks, cylinder heads, transmission housings.
M5B90 - Super finishing face milling cutter for aluminium
Demo film presenting M5B90, finishing face milling concept developed for automotive aluminium components such as cylinder heads, blocks, housings, covers and all components with a wide material engagement.
M5F90 milling cutter – one shot roughing and finishing
Demo film presenting M5F90. This is a concept face-milling cutter that enables roughing and finishing of thin wall automotive aluminium components in a single operation.
M5C90 milling cutter – one shot face milling, high speed direct finishing for aluminium
Demo film presenting M5C90. This is a concept face milling tool for high speed direct finishing of aluminium automotive parts such as cylinder heads, cylinder blocks, and all aluminium parts within wide cutter engagement.
CoroDrill® 880 CVD diamond-coated insert grades for ISO N machining
Making holes in aluminium can be a challenging task. CVD diamond-coated insert grades N124 and N134 feature an insert coating with the super-hardness of a real crystalline diamond. Together with chip breaker designs and a unique geometry the inserts guarantee a superior drilling.
Developing a face milling cutter for aluminum - Passion for innovation
The face milling cutter for aluminum - M5B90 - is a result of true innovation. Meet one of the engineers behind the development of this unique milling cutter and learn about the passion that went in to creating it. (Including subtitles)
Customer story – Sandvik Coromant and PCI Tongtai - Face milling of cylinder head solution
Face milling operations in cylinder heads put high demand on surface quality. When developing advanced milling cutters one important success factor is to have strong partnerships based on a shared passion for technology and innovation in metal cutting. PCI is a longtime partner of Sandvik Coromant where that passionate mindset is central. (Including subtitles)
Performance in challenging operations - CoroDrill 860 GM
CoroDrill® 860 with -GM geometry is a high-performance multi material drilling solution for short holes.
Edd China explores: Vibration-damping technology by Sandvik Coromant
What’s the similarity between Taipei 101 and a cutting tool? Join Edd China on his journey to Trondheim, Norway, to find out. In the film, you’ll learn about vibrations and how to reduce them in machining operations using a tuned mass damper. Edd talks to experts in vibration-reducing technology for machining and explores the technology behind Silent Tools™ damped cutting tool solutions.
Articles
The use of aluminium in the automotive industry is increasing every year. Its lightweight properties and high strength is perfect for many components.The growth in e-mobility is a driving force that further increase the use. Here we have collected articles for you to read related to trends and the challenges you may find when machining aluminium.
Ask the expert – aluminium machining
Sandvik Coromant’s Automotive Machining Specialist discusses the challenges of working in aluminium and how proper tooling can help.
Solutions for productive aluminium machining in the automotive industry
The move towards lightweight materials has seen a growth in the popularity of aluminium in the automotive industry. the correct application of optimized milling cutters across the entire range of engine component machining operations can pay significant dividends.
The challenges of working with aluminium
Manufacturing cylinder blocks involves the largest number of machines in automotive component production, through processes that are often complex and involve tight tolerances.
Overcoming the e-mobility manufacturing challenges
Electric mobility or e-mobility is more diverse than just pure electric motor-powered vehicles, and the variety means different components present their own machining challenges.
How to optimize aluminium machining in the automotive industry
Tooling selection is the key to genuine market differentiation in this segment, where the correct application of optimized milling cutters across the entire range of engine component machining operations can pay significant dividends.
Firm steps and decisive actions Toward e-Mobility
E-mobility or electromobility is a global goal that countries strive for. We are advancing at different rates but with the clear focus of reaching this goal as soon as possible.
Decarbonizing the globe´s roads
With climate change a global concern, it’s important that we produce more efficient vehicles that run on greener fuels. Here we explores how material choice and innovations in metal cutting are supporting the transition to more environmentally friendly vehicles.
Productive aluminium machining for automotive powertrains
Sandvik Coromant has the innovation power and committed focus that it takes to offers productive dedicated solutions for the automotive segment as well as for machine tool builders.
Keeping a clean face
How to have a stable and burr-free face milling machining process with predictable insert tool life. Solution: Employ the Sandvik Coromant M5B90 for predictable tool life.
Beating bi-metal engine block challenges
As demand for lightweight engines increases, more and more customers are requesting tools and methods to process bimetal engine blocks.
Product publications
Whether you are looking for information about specific milling cutters, drills or taps for machining aluminium components, here you can download publications with information about our solutions.
Services
Time is precious. With our toolbox of services, you can be sure that it is designed to increase efficiency, profitability, sustainability and knowledge in the field of metal cutting. We offer ideas and solutions that will free up your time — in essence, creating a sense of having that extra hour.
Digital solutions
CoroPlus® offer digital solutions for the entire manufacturing value chain, all the way from planning and design to in-machining and machining analysis.
CoroPlus® connect preparation and planning processes, making them quicker and more efficient. Perspectives on current machining methods and recommendations are integrated in the workflow. Automation of pre-machining tasks enables increased transparency and modern and sustainable production operations.
Join us. Stay updated.
Sign up for our newsletter today
