Milling inserts and grades for non ferrous materials
For roughing to finishing of non-ferrous materials in unstable and stable conditions, find the insert grade for your milling operation here.
CD10
This PCD-tipped grade is best for light roughing to finishing in stable conditions. A wear-resistant grade that works well in highly abrasive workpiece materials at high cutting speeds, it provides excellent surface quality and process stability and is suitable for both wet and dry machining.Benefits and features
Find your grade
Our range of insert grades for non-ferrous materials includes a PCD-tipped grade, cermet grades, PVD-coated carbide grade, and uncoated carbide grades for various machining conditions. Use the information below to find the right grade for your production.
| Stable conditions |  | |
| Unstable conditions | ||
Low abrasive work piece materials | High abrasive work piece materials |
H13A
Hard, uncoated grade for roughing to semi-finishing with sharp edges in average to stable conditions. Excellent surface finish in wet and dry machining.
H10
Very hard, uncoated grade for light roughing to finishing with sharp cutting edges in stable conditions with high demands on the quality of the surface finish for wet and dry machining.
CD10
Polycrystalline diamond-tipped grade (PCD) with sharp edges for light roughing to finishing in stable conditions for wet or dry machining with a high demand on the quality of the surface finish and process stability. Good choice for abrasive materials.
Complementary grades
Highlights
Join us. Stay updated.
Sign up for our newsletter today
