A versatile cutter that can be used for many types of grooves, threads, and chamfers; machining of eccentric components, e.g. gearbox casings, and high volume assemblies, mainly on machining centers and rotating units on lathes.
Benefits
- Inserts mounted in pockets for safe and stable mounting
- Economical insert with three edges
- Large program of inserts covering circlips, slots, threads, etc.
- Low cutting forces
- Sharp precision-ground insert
- Different thread pitches possible with one tool
- Excellent for both internal and external machining
Features
- Comes in four tool holder sizes with the same insert size
- Sharp cutting edges for high quality grooves without burr
- One grade; PVD coated GC1025 for all materials
- Multiple edges for economic machining
Application
- Thread milling
- Grooving
- Circlip grooving for holes over diameter 39 mm (1.535 inches)
ISO application area







Recommendation
When programming with tool center feed, the periphery feed can be far too high. Make sure to program with radius compensation to ensure the correct feed.
Product Range
- Inserts for both circlip and chamfering in one operation, widths 1.1-5.15 mm (0.043- 0.203 inch)
- Circlip inserts, widths 1.30-5.15 mm (0.051- 0.203 inch)
- 2-8 inserts, each with three indexable cutting edges for high productivity and economy
- With Weldon (B), arbor (Q), and bore with keyway mounting (S)
Insert:
Grooving and circlip grooving | Circlip grooves with chamfer | Threading |
![]() | ![]() | ![]() |
![]() | ![]() | Pitch 1.5–6 mm (16-4 t.p.i) Partial profile 60° V-profile Metric 60° (full profile) UN 60° |
CoroMill® 326
Versatile and cost efficient, this miniature milling cutter benefits from three cutting... chevron_right
Success stories
Customer case study Industry segment: Aerospace Component: Aerospace part Material: Ti... chevron_right
Shaft
Made from high-alloy steel or Inconel, the major challenges when machining shafts... chevron_right
Success stories
Customer test on driven unit Competitor Coromant Tool End mill (Z4) 1K324-1000-XB... chevron_right