CoroMill® 425

CoroMill^® 425 is a new finishing concept for cast iron face milling, specifically designed for the automotive business. The accurate and reliable adjustment system makes CoroMill 425 the easiest-to-use system on the market. It has eight cutting edges, and the same multi-edge inserts are used both as working inserts and as wiper inserts, mounted in the same position.

Benefits

• Easy to use
• Eight cutting edges
• Accurate and reliable adjustment system

Application

• Engine blocks
• Cylinder heads

• Finish face milling in cast iron
• Surface finish within the range Ra<1 micrometer and Rz<10 micrometer, WT<10 micrometer (at recommended cutting data), and Rmax <15 micrometer
• Materials: GCI, NCI, CGI
• Main components:
• Other components: axle housings, brake carriers, crankcases

How to overcome common challenges

Time-consuming insert indexing

The wiper inserts are exchanged at the same time as the working inserts. The patented insert adjustment system provides reliable, accurate insert positioning. The system also allows you to adjust the wiper up and down without loosening the cartridge clamping screw.

Frittering or burr on exit
The insert design with a 25° entering angle and different optimized chamfers helps reduce frittering and burr formation.

Tool life
Grades GC1010 (dry) and K20W (wet) ensure better tool life in CGI material. Wiper and working inserts have the same tool life.

ISO application area

Technical features

• Eight cutting edges (four horizontal and wiper, plus four vertical)
• Neutral insert IC17
• Wiper radius 1250 mm (49.21 inches)
• One geometry (E-KL)
• Maximum depth of cut: 0.9 mm (0.035 inches)
• f_z: 0.1–0.3 mm (0.0039–0.0118 inches)
• Grades: GC1010, GC1020, K20W, GC3220, GC3330

25° entering angle and different optimized chamfers to reduce frittering in cast iron.

Product assortment

*Coromant Capto (HSK in inch) can be ordered through our Tailor Made service.
**If required, internal coolant can be ordered through our Tailor Made service.

Adjustable wiper inserts

CoroMill 425 is designed to allow for easily adjustable wiper inserts. You can adjust the wiper insert up and down without loosening the cartridge clamping screw.

Thanks to the design, the adjustment system is very stable and accurate. However, it can cause the wedge to stick to the cassette.

The first turn of the screwdriver can sometimes require extra effort to release the wedge from the cassette.

Handling instruction