close- Toolschevron_right
- Knowledgechevron_right
- Services
- Supportchevron_right
CoroMill® MF80
For secure face and shoulder milling in close to 90-degree operations with fixture constraints
Cost efficient in ~90˚ operations
Lightweight cutter body with shim protection ensuring secure, vibration-free cutting, as well as more cost-efficient production in close to 90-degree operations with fixture constraints.
Greater machine utilization and predictability
Inserts are equipped with eight cutting edges and optimized geometry for a longer tool life and light cutting action.
Application area
- Cost-efficient face milling applications where traditionally a multi-edge or tangential milling solution is used
- Cost-efficient shoulder milling applications where true 90-degree corner and repeated shoulder milling is not the primary demand
- Thin-walled components where low axial forces are required
- Components and machine setups with limited stability
- Automotive (engine and housing components) roughing applications
- General engineering roughing and semi-roughing applications
- ISO K, ISO P face and shoulder milling applications
Product range
Cutter body
- Diameter range: 50–125 mm (2.000–5.000 inch)
- Arbor mounting and Coromant Capto® C5 cutter bodies
- Lightweight design
- Shim protection
- Internal coolant
- Close pitch (H), coarse pitch (M)
- Also available as an engineered solution
Inserts
- Insert IC size: 13 mm
- Entering angle (KAPR): ~ 89.5°
- Maximum depth of cut (APMX): 9.0 mm
- Corner radius (RE): 0.8 - 1.2 - 1.6 mm
- Wiper edge length (BS) land: 1.6 mm
Assortment
Start by selecting one or more products
Start by selecting one or more products
Highlights
Demo film: CoroMill® MF80 in action
CoroMill® MF80 for secure face and shoulder milling in close to 90-degree operations with fixture constraints. Watch the demo film to see it in action.
Metal cutting knowledge: Milling
This section covers application knowledge and tips for various milling operations. Brush up on your face and shoulder milling knowledge here.
All about CoroMill® MF80 in one place
Download the brochure for a better visual overview of the product.
