close- Toolschevron_right
- Knowledgechevron_right
- Services
- Supportchevron_right
CoroCut® 1-2
Versatile parting and grooving
Discover our next-generation solution for parting and grooving
Introducing CoroCut® 2, our new product family for parting and grooving. You’ll find upgraded state-of-the-art inserts, new grades and improved stability, always with two cost-efficient edges.
Versatile parting and grooving
With more than 700 standard inserts, CoroCut® 1-2 covers all parting and grooving applications in most materials, from standardized grooves to parting off and profiling in heat-resistant super alloys.
Cost-efficiency with two edges
The two-edge inserts are firmly positioned in the railed insert seat, providing cost-efficiency and stable performance.
Secure and efficient machining
In grooving, chips easily get stuck in the curved groove, leading to insert breakage. CoroCut® 1-2 tools with precision coolant securely evacuate the chips for an uninterrupted machining process.
Application
- Parting, external grooving, face grooving, internal grooving, profiling and hard part turning
- Roughing to finishing
In parting off and external grooving, CoroCut® 1-2 is a cost-efficient solution for depths in which 2-edged inserts can be used.
Product variants
Tool holding
- Coromant Capto®, VDI and HSK-T for connecting QS shanks and parting blades in turning centers
- QS™ stops for connecting QS shanks and Swiss tools, machine-specific adapters
- Rectangular shanks and boring bars
Plug and play adapters for easy coolant connection
CoroTurn® SL blades
CoroTurn® SL cutting blades enable a wide range of tool combinations from a small inventory of adapters and cutting heads.
Insert geometries
- Parting off: -CF, -CM, -CR, -CS
- Grooving and side turning: -TF, -TM
- Grooving: -GF, -GM, -GR
- Profiling: -RO, -RM, -RE
- Wiper: -CF, -TF
- Hard part turning: -XB
Insert grades
- PVD: GC1105, GC1125, GC1145
- CVD: GC1135, GC4325, S205, CG3115
- CBN: CB7015, CB7025, CB7105 and CB7115
- PCD: CD10
- Ceramic: CC6220
- Uncoated: H13A, H10F
Assortment
Start by selecting one or more products
Start by selecting one or more products
Highlights
Seal fin grooving
Generating small radii profiles with correct profile widths puts demands on a robust tooling solution. CoroCut® 1-2 for seal fin grooving is available in insert widths 1.5 and 2 mm (0.059 and 0.079 inch).
Access with angled inserts
Angled inserts are perfectly formed for those difficult-to-access grooves in, e.g., the turbine disc, eliminating the need for special tools.
Hard part turning with CoroCut® 1-2
The new -XB geometry for hard part turning can operate at very high feed rates, up to 1.2 mm/rev (0.047 in/rev) without compromising surface finish.
