CoroCut® MB is a high precision system for grooving, face grooving, profiling and pre-parting. The edge line of the cutting edge is sharp with a thin-layered coating, which in combination with the stability of the tools makes it ideal for internal machining.
Benefits
- Vibration free machining
- Fast set up for both tool and insert
- Stable high precision interface between interface and tool holder
Features
- Front-mounted exchangeable cutting tool
- Sharp cutting edges
- Geometries and grades for all materials
- Carbide shanks for long overhangs
- Through coolant
- Easy fix clamping
- Grooving tools in a large variety of widths and corner radii – also for standardized grooves such as O-rings and circlip grooves.
Application
- Finish and precision machining at low feeds and speeds
- For shallow grooves
- Thread turning, turning, back boring, face grooving, profiling and pre-parting operations
- Dedicated face grooving holder with nozzles for high precision coolant
ISO application area
 |
 |
 |
 |
 |
Recommendations
The cutting tool is mounted with a screw from the front position in three grooves for safe and stable mounting.
Size 07 for min hole 10 mm (0.394 inch)
Size 09 for min hole 14 mm (0.551 inch)
Size 11 for min hole 16 mm (0.630 inch)
Grades and geometries
| Threading | Turning | Back boring | Grooving | Face grooving | Profiling | Pre-parting | ||
| Low feed | MB-07TH | MB-07T | MB-07B | MB-07G MB-09G MB-11G |
MB-09FA MB-09FB MB-11FA MB-11FB |
MB-07R MB-09R MB-11R |
MB-07GX | |
| First choice for |
|
GC1025 | GC1025 | GC1025 | GC1025 | GC1025 | GC1025 | GC1025 |
|
|
GC1025 | GC1025 | GC1025 | GC1025 | GC1025 | GC1025 | GC1025 | |
|
|
GC1025 | GC1025 | GC1025 | GC1025 | GC1025 | GC1025 | GC1025 | |
|
|
GC1025 | GC1025 | GC1025 | GC1025 | GC1025 | GC1025 | GC1025 | |
|
|
GC7015 | GC7015 | - | GC7015 | - | - | - |
Tool holding
For accurate machining with less vibration and precise centre height of
the tool, use cylindrical bars with EasyFix sleeves. Both steel shank
bars and carbide shank bars are available for coolant connectors.
- Steel shank bars for overhang up to 1 x D
- Carbide shank bars for overhangs up to 5.5 x D
- EasyFix for lower vibrations and fast set-up
Sliding head machines
Tools for sliding head machines In the realm of precision engineering, mastering... chevron_right
EasyFix
EasyFix EasyFix Easy-Fix EasyFix sleeves are a solution for cylindrical boring... chevron_right
Parting and grooving inserts and grades
Parting and grooving inserts and grades CVD-coated grade for tough and demanding... chevron_right
Threading inserts and grades
Threading inserts and grades GC1125 Find your grade GC1135 GC1125 is the First... chevron_right
