CoroReamer® 830 is a modular designed tool with replaceable cutting head, easy to change while still in the machine tool spindle. The cutting head is located in the holder by a precision made tapered coupling for highest concentricity and repeatability with a radial run-out of 3µm (120µinches)
Benefits
- High surface finish and operation security
- High penetration rate
- Fast and easy head change with high accuracy < 3µm (120µinch)
Features
- Boring range: 10-31.75 mm (0.394-1.250 inch)
- Achievable hole tolerance: H7
- Brazed cermet inserts in grade P10R
- Effective chip evacuation by directing cutting fluid at each edge
- Short and long shank options
- Head change
Application
- For steel, nodular cast iron, and malleable cast iron materials
- Through holes, angled surface, and cross hole
ISO application area
Head change
Clamping and releasing of the cutting head is carried out by turning the clamping mechanism only a quarter of a turn using a hexagonal key.
CoroTap® 300
Optimized geometries and grades for steel tapping. Optimized geometries and grades... chevron_right
Cylinder head
The cylinder head conveys air and fuel to the combustion chamber and serves as a... chevron_right
Spiral flute tap animation CoroTap 300
open_in_new
CoroTap T200 and T300 - Optimized for ISO-P steel applications
Introducing the Optimized CoroTap® 200 spiral point tap and CoroTap® 300 spiral flute... open_in_new
