Ensure your machine starts making money instantly
Buying a new machine is a large investment that will hopefully pay you back in increased productivity, better machine utilization and lower cost per machined part. Make the best out of your investment by acquiring a start-up tool kit to ensure that your machine starts making money for you instantly.
We have different start-up tool kits for the most common turning centers and sliding head machines. Each kit consists of typical tools plus inserts.
Did you purchase a start-up tool kit with your new machine? Congratulations! We’ll help you optimize your set-up right away.
Find the right tool-kit
Turning centres
There are different tool kits available for turning centres, depending on machine interface size, metric or imperial standard and operation (external or internal). Each holder comes with four inserts. You can also choose tools with high precision coolant technology to get the most out of your turning operations.
- External turning shank
Sliding head machines
There are different kits to choose from, depending on machine type, size, and whether you require tools for an external or internal operation. Choose high precision coolant technology for improved performance and chip control.
Citizen
- External turning – quick change with QS™ holding system
- External turning – QS™ holding system, for quick change with high precision coolant
Turning centres
External turning shank
Right hand shown
| T-Max® P holder for CNMG insert | 1 |
| T-Max® P holder for DNMG insert | 1 |
| Holder for CoroCut® 1-2 parting off insert | 1 |
| Negative C-style (CNMG) insert for T-Max® P | 4 |
| Negative D-style (DNMG) insert for T-Max® P | 4 |
| 3 mm insert for CoroCut® 1-2 | 4 |
| KIT-TC-M-LE-20 | Metric | 20 x 20 | Left |
| KIT-TC-M-LE-25 | Metric | 25 x 25 | Left |
| KIT-TC-M-RE-20 | Metric | 20 x 20 | Right |
| KIT-TC-M-RE-25 | Metric | 25 x 25 | Right |
| KIT-TC-A-LE-0750 | Imperial | 0.75 x 0.75 | Left |
| KIT-TC-A-RE-0750 | Imperial | 0.75 x 0.75 | Right |
Sliding head machines – Citizen
External turning – quick change with QS™ holding system
| QS holder for positive V-style insert (VCEX) | 1 |
| QS holder for positive D-style insert (DCGT) | 1 |
| QS holder for CoroCut® 1-2 parting off insert | 1 |
| QS holder for positive C-style insert (CCGT) | 1 |
| Positive V-style insert (VCEX), GC1105 | 4 |
| Positive D-style insert (DCGT), GC1105 | 4 |
| 2 mm insert for CoroCut 1-2, GC1125 | 4 |
| Positive C-style insert (CCGT), GC1105 | 4 |
| QS stop | 4 |
| QS wedge | 8 |
| KIT-QS-M-CZ-16 | Metric | 16 × 16 |
Sliding head machines – Citizen
External turning – QS™ holding system for quick change with high precision coolant
| QS holder for positive V-style insert (VCEX) | 1 |
| QS holder for positive D-style insert (DCGT) | 1 |
| QS holder for CoroCut® QD parting off insert | 1 |
| QS holder for positive C-style insert (CCGT) | 1 |
| QS holder for CoroThread® 266 threading insert | 1 |
| Positive V-style insert (VCEX), GC1105 | 4 |
| Positive D-style insert (DCGT), GC1105 | 4 |
| 2 mm parting insert for CoroCut® QD, GC1125 | 4 |
| Positive C-style insert (CCGT), GC1105 | 4 |
| Threading insert for CoroThread® 266 holder, GC1135 | 4 |
| QS stop | 5 |
| QS wedge | 10 |
| Coolant connector | 5 |
| KIT-QS-M-CZ-16HP | Metric | 16 × 16 |
